Tips:
Normally you do not need to pair the camera and monitor, we defaulted and paired them well to the first channel before delivery.
YUWE-FORSAFEI,NOT ONLY FOR SAFE!
YUWEI, has focused on car backup camera system for 12 years. There are over 500 vehicles around the world
installing YUWEI wireless backup camera systems every day.
Our team consists of more than 100 talented staff who are striving to make everything better on each day.
We manage the complex things, while you comfortably enjoy the simple operation. Our objectives: Save your time,
save your money, give you the best wireless backup camera system!
Seller Warranty
24 Hours Dedicated Email Customer Support
30-Day Money Back Guarantee
12 Month Replacement Warranty
Lifetime Support Guarantee
Monitor
7-Inch Digital panel
Power Supply:DC12V-32V
Parking guide line
Working current:450mA
Effective pixels: 800 x RGB x 480
Brightness : 500 cd/m2
Contrast : 400 : 1
Detachable sunshade
Operating Temperature: -20°C~+80°C
Storage temperature: -30°C~+80°C
Camera
Image device:1/3′ SHARP CCD
Power Supply : DC 12V~32V
Waterproof:IP69
Night-vision 10 x infra-red LEDs
Mirror/Non-Mirror Switch
Sync.System: 700TV Lines
Current consumption: Max 400mA
Working current:260mA
Free viewing angle: 130°
Operating Temperature:-20~+70°C
Wireless TX/RX(Built-in)
Transmitting distance up to 200ft (In Open Area)
Power on: 2SEC Max
Latency :100ms Max
Resolution:VGA/640X480
Frame Rate :30f/s
ID: PAIRING
Operation Frequency :2400~2483.5MHz
Support 4 cameras, each camera to be viewed individually (no quad)
7 Inch LCD monitor, Built in Digital wireless receiver, No additional RX box, The guideline can be turned on/off controlled by the button
Camera built in transmitter ,No additional TX box, IP69k Waterproof camera with 10 infrared lightes and Sharp CCD sensor & night vision,Zinc alloy material for the camera durable even use in bad weather outside
Instant transmission, No interference, No additional wiring, Wireless that works, In open area, wireless transmitting distance up to 150ft. Stable signal transmission, Smooth and clear camera signal even car speed change from 50mile/h to 70mile/h speedily
Installation is simple! DIY design, The camera is powered by connecting the wires to your reverse tail lights. When the vehicle is in reverse, the image is wirelessly transmitted to the monitor. Monitor Can be suction cup mounted in the front of window glasses Or stand bracket placed in the front of dash board, Monitor is directly powered from the cigarette lighter socket or ACC, There is no need to run any wires from the camera to the monitor
Reviews
There are no reviews yet.